The CarMover is a floor system to move vehicles from one working bay to another. It is easy,
fast, effortless and is designed to be done by only one technician.
The CarMover, is composed of 4 plates and works on rails using one plate for every wheel of
the vehicle. Each plate weighs only 8 Kg or 17.6 pound. By design, it is easy for the technician
to move it from the end of the conveyor line to the starting point. Each plate’s load capacity is
700 kg or 1543 pound each.
The CarMover plate is produced with a special aluminum alloy and with a special geometric
structure, that guarantees no bending. The plastic connectors, on each side of the plate, permits
the vehicles wheels to go up to the plate without any effort and without any slipping
The CarMover, permits one technician to move a vehicle by pushing it with an effort of only
12 Kg or 26 pound. The design uses special wheels and a special rail system where the point of
contact between them is very thin, reducing the friction to a minimum, permitting a technician
to move the vehicle using minimum effort.
The CarMover works with two different type of rails, having the same performance, one inside
the floor level and the other one above floor level. The number of rail positions is 5 per bay in
Europe and 6 for North America, this allows the CarMover to accommodate every model and
size of vehicle.
Symach uses CarMover inside the FixLine conveyor in every new layout.
READSymach Announces Installation of FixLine Process at Collision Works of Oklahoma