• Vai al sito in italiano
SAP SYSTEM

BODY FILLER

Body Filler
BODY FILLER

PRIMER

Primer
PRIMER

WATER BASE

Water Base
WATER BASE

CLEAR LACQUER

Clear Lacquer
CLEAR LACQUER

SPAP DRYTRON

SPAP drytron
SPAP DRYTRON
CLEAR LACQUER
SYSTEM SAP EXAMPLE OF A JOB OF 3 PANELS
CONVENTIONAL SYSTEM EXAMPLE OF A JOB OF 3 PANELS
spap 4:30 minutes
4:30 minutes
CLEAR LACQUER SPRAYING

The application of the clear lacquer takes place immediately after the water base has dried, with no need to wait. • Spraying the first half-coat. • Immediately spray the second full-coat, without waiting. The time required for the application of the two coats is about 4:30 minutes.
conventional 3 minutes
3:00 minutes
SPRAYING THE FIRST COAT

Spray the first coat. The time required for application of the first coat is about 3:00 minutes.
spap 12 minutes
12:00 minutes
DRYING

Drying is immediately performed by 2 passage of the robot upon completing the application, at a speed of approx. 80 - 60 linear cm per minute. The time required for drying is about 12:00 minutes
conventional 3 minutes
3:00 minutes
FLASH-OFF

Wait for flash-off before continuing with the next coat. The flash-off time required for the half-coat is about 3:00 minutes.
conventional 4 minutes
4:00 minutes
SPRAYING THE SECOND COAT

Spray the second coat. The time required for application of the second coat is about 4:00 minutes.
conventional 40 minutes
40:00 minutes
DRYING

Drying is carried out in the hot air oven. The total drying time required is 40:00 minutes.
spap 16:30 total time
16:30 minutes
TOTAL TIME

The total time for the entire clear lacquer application and dryin g cycle is 16:30 minutes
conventional 50 total time
50:00 minutes
TOTAL TIME

The total time re quired for application and dryin g with the con ventional system is 50:00 minutes.
youtube facebook
News
Carlass visit Symach
November 2017
READ
Carglass® Executives and Customers Visit Symach’s State-of-the-Art Facility in Italy
SYMACH System Fixline
October 2017
READ
Symach’s FixLine System Installed in New State-of-the-art Body Shop in Belgium
Gary Lyons SYMACH
September 2017
READ
Gary Lyons New SYMACH Project Manager North America
Future Center Symach
September 2017
READ
Symach’s Future Center in Bologna, it hosted the Companies: AKZO NOBEL, BASF and The Sherwin-Williams
European Auto Body
July 2017
READ
Another successful Symach project: European Auto Body
CSN Blue Mountain Collision
July 2017
READ
CSN Blue Mountain Collision opened a 10,700-square-foot Symach equipped shop in Collingwood, Ontario, Canada
Nace Automechanika
July 2017
READ
SYMACH to Host Info Session at NACE Automechanika
news
May 2017
READ
CSN Blue Mountain Collision in Ontario Builds New Shop with Symach FixLine System
Autopromotec 2017
May 2017
READ
SYMACH to Host Open House During AUTOPROMOTEC
© 2016 | Symach srl All Rights Reserved
Back to top